TEO
Tukra Extended Outputs
This module it's an expander for the trigger sequencer TUKRA.
Features 6 additional audio outputs for single channel processing and USB for MIDI in & out (midi class compliant device) to connect with Ableton, Cubase, Logic or any other DAW.
Easily configurable for envelope, LFO and stepped CV (pseudo v/oct) instead of individual audio track output.
TEO support was implemented in Tukra's firmware 1.05. Earlier versions will output nothing.
4 HP
+12v 10mA
-12v 11mA
INSTALLATION
Connect the USB to the Teensy USB port in Tukra.
TEO has two 2x5 pin headers:
Upper one is to connect with Tukra.
Center one is for eurorack power.
THIS IS ONLY FOR THE DIY OPTION, NOT NECESSARY IF YOU BOUGHT THE UNIT ASSEMBLED
solder two 2x5 pin headers.
Solder 6 thonkiconn jacks.
Cut the red wire!
The PCB+Panel kit includes also the USB extension cable.
To avoid the +5v from the USB to feed the Teensy CUT THE RED WIRE, and use isolating tape to avoid undesired contacts.